P&E开发工具 Cosmic编译器 MetaGeek无线频谱分析 无线传感器网络

USB-ML-Universal
USB Multilink Universal Debug Probe for ARM® devices and 8/16/32 bit devices

Multilink Universal 多合一开发接口

特性:
  • 支持的芯片系列:
    8-/16-/32-bit devices
    ARM Cortex devices
    NXP: S32
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
      LPC  
      i.MX
    Atmel :
    SAMxxx
    Qorivva MPC5xxx
    Cypress:
    CCG2,FM3,PRoC-BLE, PSoC4,PSoC5,PSoC6,Traveo-II
      ColdFire V1  
    ColdFire V2/3/4
    Infineon:
    XMC
    DSC
    Maxim:
    DARWIN
    S12Z
    NordicSemi:
    nRF51, nRF52
    HC(S)12(X)
    OnBright:
    OB90Rxx
      HCS08
    Redpine Signals:
    WiSeMCU
      RS08
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
       
    Silicon Labs :
    EFM32,EFR32,SiM3
       
    STMicroelectronics:
    STM32
       
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
       
    Toshiba:
    TX00,TX03,﹠TX04
       
    WIZnet:
    W7500x
    STMicro: SPC5
     
     
  • 从PC到Multilink的USB接口允许快速,方便的编程和调试--通过方便和兼容的USB接口。
  • USB供电 -无需单独的电源供应(目标烧写小于1mA)。
  • 目标电压:1.8V-5.25V
  • 目标频率:16KHz-50MHz (适用于HCS08,RS08,CFV1,S12Z,或HCS12X)
  • 计算机USB接口 ( Windows 2000/XP/2003/Vista/7/8/10 )
  • 自动频率检测+适应,用于HCS08设备。
  • 自动频率检测,用于HC(S)12(X)设备。
  • 对RS08设备在RESET line生成烧写电压
  • Supports JTAG daisy chaining of multiple ARM MCUs.
  • Pipelined programming algorithms for some Power Architecture families that dramatically increase programming speed.
  • ARM device support includes both the JTAG and SWD protocols

USB-ML-Universal-FX
USB Multilink Universal FX High-Speed Debug Probe for ARM® devices and 8/16/32 bit devices

Multilink Universal FX多合一开发接口

特性:
  • 支持的芯片系列:
    8-/16-/32-bit devices
    ARM Cortex devices
    NXP: S32
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
      LPC  
      i.MX
    Atmel :
    SAMxxx
    Qorivva MPC5xxx
    Cypress:
    CCG2,FM3,PRoC-BLE, PSoC4,PSoC5,PSoC6,Traveo-II
      ColdFire V1  
    ColdFire V2/3/4
    Infineon:
    XMC
    DSC
    Maxim:
    DARWIN
    S12Z
    NordicSemi:
    nRF51, nRF52
    HC(S)12(X)
    OnBright:
    OB90Rxx
      HCS08
    Redpine Signals:
    WiSeMCU
      RS08
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
    Power MPC5xx/8xx
    Silicon Labs :
    EFM32,EFR32,SiM3
      HC16
    STMicroelectronics:
    STM32
      CPU3xx
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
     
    Toshiba:
    TX00,TX03,﹠TX04
       
    WIZnet:
    W7500x
    STMicro: SPC5
     
     
  • 从PC到Multilink的USB接口允许快速,方便的编程和调试
  • USB供电 -无需单独的电源供应(目标烧写小于1mA).
  • 通信速度: 比其他P&EMultilink快10倍
  • 可为目标板供电
  • 计算机USB接口 ( Windows 2000/XP/2003/Vista/7/8/10)
  • 目标电压:1.8V-5.25V
  • 目标频率:16KHz-50MHz (适用于HCS08,RS08,CFV1,S12Z,或HCS12X)
  • 额外的输入/输出保护
  • 自动频率检测+适应,用于HCS08的Trimming。
  • 自动频率检测,用于HC(S)12(X)设备。
  • 对RS08设备在RESET line生成烧写电压
  • I/O line clamping for added protection
  • Supports JTAG daisy chaining of multiple ARM MCUs.
  • Pipelined programming algorithms for some Power Architecture families that dramatically increase programming speed.
  • ARM device support includes both the JTAG and SWD protocols

CYCLONE-LC-UNIV
Production Programmer and Debug Probe for ARM® devices and NXP 8/16/32-bit devices
烧写、调试和测试多合一开发工具用于NXP8/16/32 和ARM Cortex 系列芯片

  • 支持芯片系列:
    8-/16-/32-bit devices
    ARM Cortex devices
    NXP: S32
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
      LPC  
      i.MX
    Atmel :
    SAMxxx
    Qorivva MPC5xxx
    Cypress:
    CCG2,FM3,PRoC-BLE, PSoC4,PSoC5,PSoC6,Traveo-II
      ColdFire V1  
    ColdFire V2/3/4
    Infineon:
    XMC
    DSC
    Maxim:
    DARWIN
    S12Z
    NordicSemi:
    nRF51, nRF52
    HC(S)12(X)
    OnBright:
    OB90Rxx
      HCS08
    Redpine Signals:
    WiSeMCU
      RS08
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
    Power MPC5xx/8xx
    Silicon Labs :
    EFM32,EFR32,SiM3
      HC08
    STMicroelectronics:
    STM32
    ARM Nexus (MAC7xxx)
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
    Toshiba:
    TX00,TX03,﹠TX04
       
    WIZnet:
    W7500x
    STMicro: SPC5,STM8(with STM8 Adapter)
    Infineon: TriCore (AUDO TC1xx and AURIX TC2xx/ TC3xx)
基础软件功能:
  • 脱机烧写 - 联机操作和脱机操作,两种操作方式
  • 基础自动控制 - 通过计算机进行 SDK, Console, and GUI 控制
  • 多种接口方式- USB,串口和以太网口三种计算机接口(Windows 2000/XP/vista/7/8/10)
  • LCD液晶触摸屏
  • 供电管理- 通过继电器控制Cyclone "power-in" a和 "power-out"口的供电。也可通过调试排线向目标板供电
  • 自动计数 和 共享序列号
  • Ethernet Based Debugging- Compatible with many development IDEs
  • 存储空间 - 16MB内存,最多存储8个程序
Cyclone 升级软件功能:
CYCLONE-FX-UNIV
Advanced all-in-one program/debug/test interface for many ARM Cortex & NXP 8/16/32-bit devices. Enhanced speed/security/storage.
烧写、调试和测试多合一开发工具用于NXP8/16/32 和ARM Cortex 系列芯片。在烧写速度、加密和存储性能进一步提升。
  • 支持芯片系列:
    8-/16-/32-bit devices
    ARM Cortex devices
    NXP: S32
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
      LPC  
      i.MX
    Atmel :
    SAMxxx
    Qorivva MPC5xxx
    Cypress:
    CCG2,FM3,PRoC-BLE, PSoC4,PSoC5,PSoC6,Traveo-II
      ColdFire V1  
    ColdFire V2/3/4
    Infineon:
    XMC
    DSC
    Maxim:
    DARWIN
    S12Z
    NordicSemi:
    nRF51, nRF52
    HC(S)12(X)
    OnBright:
    OB90Rxx
      HCS08
    Redpine Signals:
    WiSeMCU
      RS08
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
    Power MPC5xx/8xx
    Silicon Labs :
    EFM32,EFR32,SiM3
      HC08
    STMicroelectronics:
    STM32
    ARM Nexus (MAC7xxx)
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
    Toshiba:
    TX00,TX03,﹠TX04
       
    WIZnet:
    W7500x
    STMicro: SPC5,STM8(with STM8 Adapter)
    Infineon: TriCore (AUDO TC1xx and AURIX TC2xx/ TC3xx)
    Renesas: H8 and H8S/Tiny, MC16C and M16C80, M32C, R8C, RH850, RL78, RX600(with Renesas Adapter)
基础软件功能:
  • 脱机烧写 - 联机操作和脱机操作,两种操作方式
  • 基础自动控制 - 通过计算机进行 SDK, Console, and GUI 控制
  • 多种接口方式- USB,串口和以太网口三种计算机接口(Windows 2000/XP/vista/7/8/10)
  • LCD液晶触摸屏
  • 供电管理- 通过继电器控制Cyclone "power-in" a和 "power-out"口的供电。也可通过调试排线向目标板供电
  • 自动计数 和 共享序列号
  • Ethernet Based Debugging- Compatible with many development IDEs
Cyclone FX 特有高级功能:
  • 高速通讯 - 下载速率可达 75 Mbits/s
  • 存储空间 - 1G内存,可存储200+脱机文件
  • 目标电流和电压测量
  • ProCryption安全性 - RSA./AES 加密、限制编程次数或日期等
  • 高级自动控制 -包含 Gang Programming 和 Dynamic Data Programming等
  • 扩展内存 - SDHC接口支持SDHC卡,可满足更大存储需求

CYCLONE-LC-ARM
Production Programmer and Debug Probe for ARM® devices

用于ARM Cortex™-M的通用在线烧写设备

  • 支持的芯片系列:
    ARM Cortex devices:
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
    Atmel :
    SAMxxx
    Cypress:
    CCG2,FM3,PRoC-BLE, PSoC4,PSoC5,PSoC6,Traveo-II
    Infineon:
    XMC
    Maxim:
    DARWIN
    NordicSemi:
    nRF51,nRF52
    OnBright:
    OB90Rxx
    Redpine Signals:
    WiSeMCU
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
    Silicon Labs :
    EFM32,EFR32,SiM3
    STMicroelectronics:
    STM32
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
    Toshiba:
    TX00,TX03,﹠TX04
    WIZnet:
    W7500x
    基础软件功能:
    • 脱机烧写 - 联机操作和脱机操作,两种操作方式
    • 基础自动控制 - 通过计算机进行 SDK, Console, and GUI 控制
    • 多种接口方式- USB,串口和以太网口三种计算机接口(Windows 2000/XP/vista/7/8/10)
    • LCD液晶触摸屏
    • 供电管理- 通过继电器控制Cyclone "power-in" a和 "power-out"口的供电。也可通过调试排线向目标板供电
    • 自动计数 和 共享序列号
    • Ethernet Based Debugging- Compatible with many development IDEs
    • 存储空间 - 16MB内存,最多存储8个程序
    Cyclone 升级软件功能:

USB-ML-ACP
USB Multilink Debug Probe for ARM® devices

特性:
  • 支持的芯片系列:
    ARM Cortex devices:
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
    Atmel :
    SAMxxx
    Cypress:
    CCG2,FM3,PRoC-BLE, PSoC4,PSoC5,PSoC6,Traveo-II
    Infineon:
    XMC
    Maxim:
    DARWIN
    NordicSemi:
    nRF51,nRF52
    OnBright:
    OB90Rxx
    Redpine Signals:
    WiSeMCU
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
    Silicon Labs :
    EFM32,EFR32,SiM3
    STMicroelectronics:
    STM32
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
    Toshiba:
    TX00,TX03,﹠TX04
    WIZnet:
    W7500x
  • 从PC到Multilink的USB接口允许快速,方便的编程和调试--通过方便和兼容的USB接口。
  • USB供电 -无需单独的电源供应(目标烧写小于1mA)。
  • 目标电压:1.8V-5.25V
  • 计算机USB接口 ( Windows 2000/XP/2003/Vista/7/8/10 )
  • Supports JTAG daisy chaining of multiple ARM MCUs.
  • Pipelined programming algorithms for some Power Architecture families that dramatically increase programming speed.
  • ARM device support includes both the JTAG and SWD protocols

PROG-HL-ARM(former PROGACMP)
PROG for ARM® Cortex™ processors (Hardware License)

Kinetis ARM 烧写软件

通过P&E BDM USB Multilink Universal转换接口(P&E USB-ML-UNIVERSAL(FX),连接到目标板 mini-10或 mini-20针JTAG接口上),在线烧写内外闪存软件。
功能:

  • 烧写 Program
  • 校验 Verify
  • 检查 Blank check
  • 上载 Upload
  • 显示 Display
  • 擦写 Erase

LIC-CYC-CTRL-ADV
Activates Advanced Automated Programming features on Cyclone Programmer

  • Add/Remove/Update many images in the Cyclone (Console, SDK, GUI)
  • Simultaneously (Gang) Control of multiple Cyclones via the USB, Serial, or Ethernet connections
  • Program (and Read) Dynamic Data in addition to fixed image data
  • Remote Display Access
  • Read/write Cyclone properties
  • Read Image and target Properties and Status
  • Compare images against a SAP file

LIC-CYC-SDCARD
SDHC port activation for external storage on Cyclone Programmer

  • 安装在Cyclone Programmer上激活SDHC端口
注:仅包含license,SDHC card 需单独购买
SDCARD
16 GB Encryped SDHC Flash Card for Cyclone
  • Easily be moved from Cyclone to Cyclone.
  • 16GB Encryptyed Cyclone SDHC Card is pre-formatted, tested, and certified to work with CYCLONE programmers.
注:需配套SDHC port License使用
LIC-CYC-PROCRYPTION
Cyclone LC Protected and Encrypted SAP Image Activation License
    It allows users to place protection on their programming images to restrict image use by date range or number of programs allowed. It also allows users to create RSA/AES encrypted programming images that use their own uniquely generated ImageKey. These images may only be used to program targets on Cyclones that are pre-configured with this unique ImageKey. This license keeps the user securely in control of both their IP and the programming process.
  • Restrict Image Use
  • Keep Programming Images Secure
  • Encryption is Easy To Implement and Manage

GDB Server Plug-In for Eclipse-based ARM IDEs
PEmicro plug-in for working with freely downloadable GDB Debugger

PEmicro's GDB Server Plug-In for Eclipse-based ARM IDEs is the piece which links the GDB debugger to PEmicro hardware, allowing debug and programming via USB, Serial, and Ethernet buses.

  • Real-Time Expression View
  • OS-Aware Feature Supports FreeRTOS
  • Multi-Core project debugging
  • Parallel debugging of multiple ARM devices
  • Preserve memory ranges across an erase
  • Trim Kinetis devices during programming
  • EEPROM partitioning capability during flash programming
  • SWD and JTAG : Both communications protocols are supported
  • JTAG daisy chain support
  • Attach to a running part during debug session
  • Attach to a running part during debug session
  • Semihosting : Simple way for target to send debug messages to the PC. To Eclipse or a Telnet client
  • Power Control : Many of PEmicro's debug interfaces can provide power to the target
  • Compatible PEmicro hardware interfaces include:

  • •Multilink ACP - development interface for ARM devices
    •Multilink Universal - all-in-one development interface and debug probe
    •Multilink Universal FX - Advanced high-speed all-in-one development interface and debug probe
    •Cyclone - series production programmers with stand-alone capability
    •Cyclone FX - series advanced high speed production programmers with stand-alone capability, speed, storage, security, and other enhancements
    •OpenSDA / Embedded OSJTAG- low-cost evaluation boards
Unit Library SDK for ARM® Cortex™-M processors

C/C++ and Delphi library modules which allow the creation of custom PC applications which use P&E hardware interfaces to control ARM® Cortex™-M processors via background debug mode

特性:

  • 通过Multilink Universal, Multilink Universal FX, CYCLONE-LC-UNIV, CYCLONE-FX-UNIV , CYCLONE-LC-ARM, Cyclone MAX, and Tracelink.工作
  • 提供BDM交互界面
  • 包含C和Delphi两种语言模块
  • 具有C和Delphi原代码和相应的可执行演示程序
  • 支持多种编译环境
  • UNITACMP and UNITACMP_DIST: Microsoft Visual C++ 5.0 或更高版本, Delphi 2.0 或更高版本
    • 开发平台 Windows 32-bit,Windows 64-bit (XP, Vista, 7,8,10).
  • 适用生产线测试