P&E开发工具 Cosmic编译器 MetaGeek无线频谱分析 无线传感器网络

USB-ML-Universal
USB Multilink Universal Debug Probe for ARM® devices and 8/16/32 bit devices: NXP's: Kinetis, LPC, S32, Qorivva, MPC5xx/8xx, Coldfire, DSC, S12Z, RS08, S08,HC(S)12(X), and STMicroelectronics SPC5 MCU's

Multilink Universal 多合一开发接口

特性:
  • 支持的芯片系列:
    8-/16-/32-bit devices
    ARM Cortex devices
    NXP: S32
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
      LPC
    Atmel :
    SAMxxx
      Qorivva MPC5xxx
    Cypress:
    CCG2 , FM3 , PRoC-BLE , PSoC®4 , PSoC®5 , PSoC®6
      ColdFire V1
    Infineon:
    XMC
    ColdFire V2/3/4
    NordicSemi:
    nRF51, nRF52
    DSC
    OnBright:
    OB90Rxx
      HC(S)12(X)
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
      S12Z
    Silicon Labs :
    EFM32,EFR32,SiM3
      HCS08
    STMicroelectronics:
    STM32
      RS08
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
       
    Toshiba:
    TX00,TX03,﹠TX04
    STMicro: SPC5
  • 从PC到Multilink的USB接口允许快速,方便的编程和调试--通过方便和兼容的USB接口。
  • USB供电 -无需单独的电源供应(目标烧写小于1mA)。
  • 目标电压:1.8V-5.25V
  • 目标频率:16KHz-50MHz (适用于HCS08,RS08,CFV1,S12Z,或HCS12X)
  • 计算机USB接口 ( Windows 2000/XP/2003/Vista/7/8/10 )
  • 自动频率检测+适应,用于HCS08设备。
  • 自动频率检测,用于HC(S)12(X)设备。
  • 对RS08设备在RESET line生成烧写电压
  • Supports JTAG daisy chaining of multiple ARM MCUs.
  • Pipelined programming algorithms for some Power Architecture families that dramatically increase programming speed.
  • ARM device support includes both the JTAG and SWD protocols

USB-ML-Universal-FX
USB Multilink Universal FX High-Speed Debug Probe for ARM® devices and 8/16/32 bit devices: NXP's: Kinetis, LPC, S32, Qorivva, MPC5xx/8xx, Coldfire, DSC, S12Z, RS08, S08,HC(S)12(X), and STMicroelectronics SPC5 MCU's

Multilink Universal FX多合一开发接口

特性:
  • 支持的芯片系列:
    8-/16-/32-bit devices
    ARM Cortex devices
    NXP: S32
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
      LPC
    Atmel :
    SAMxxx
      Qorivva MPC5xxx
    Cypress:
    CCG2 , FM3 , PRoC-BLE , PSoC®4 , PSoC®5 , PSoC®6
      ColdFire V1
    Infineon:
    XMC
    ColdFire V2/3/4
    NordicSemi:
    nRF51, nRF52
      DSC
    OnBright:
    OB90Rxx
      HC(S)12(X)
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
      S12Z
    Silicon Labs :
    EFM32,EFR32,SiM3
      HCS08
    STMicroelectronics:
    STM32
      RS08
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
      HC16
    Toshiba:
    TX00,TX03,﹠TX04
      CPU3xx    
      Power MPC5xx/8xx
    STMicro: SPC5
  • 从PC到Multilink的USB接口允许快速,方便的编程和调试
  • USB供电 -无需单独的电源供应(目标烧写小于1mA).
  • 通信速度: 比其他P&EMultilink快10倍
  • 可为目标板供电
  • 计算机USB接口 ( Windows 2000/XP/2003/Vista/7/8/10)
  • 目标电压:1.8V-5.25V
  • 目标频率:16KHz-50MHz (适用于HCS08,RS08,CFV1,S12Z,或HCS12X)
  • 额外的输入/输出保护
  • 自动频率检测+适应,用于HCS08的Trimming。
  • 自动频率检测,用于HC(S)12(X)设备。
  • 对RS08设备在RESET line生成烧写电压
  • Supports JTAG daisy chaining of multiple ARM MCUs.
  • Pipelined programming algorithms for some Power Architecture families that dramatically increase programming speed.
  • ARM device support includes both the JTAG and SWD protocols

CYCLONE-LC-UNIV
Production Programmer and Debug Probe for ARM® devices and NXP 8/16/32-bit devices
烧写、调试和测试多合一开发工具用于NXP8/16/32 和ARM Cortex 系列芯片

  • 支持芯片系列:
    8-/16-/32-bit devices
    ARM Cortex devices
    NXP: S32
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
      LPC
    Atmel :
    SAMxxx
      Qorivva MPC5xxx
    Cypress:
    CCG2 , FM3 , PRoC-BLE , PSoC®4 , PSoC®5 , PSoC®6
      ColdFire V1
    Infineon:
    XMC
    ColdFire V2/3/4
    NordicSemi:
    nRF51, nRF52
      DSC
    OnBright:
    OB90Rxx
      HC(S)12(X)
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
      S12Z
    Silicon Labs :
    EFM32,EFR32,SiM3
      HCS08
    STMicroelectronics:
    STM32
      RS08
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
      HC08
    Toshiba:
    TX00,TX03,﹠TX04
      Power MPC5xx/8xx
      ARM Nexus(MAC7xxx)
    STMicro: SPC5,STM8(需搭配 Adapter使用)
功能:
  • USB,串口和以太网口三种计算机接口(Windows 2000/XP/Vista/7/8/10)
  • 16MB内存,最多存储8个程序
  • 4.3”触摸屏,配合start按键进行脱机烧写控制和设置功能
  • 通过继电器控制Cyclone "power-in" a和 "power-out"口的供电。也可通过调试排线向目标板供电
  • Auto-counting serial numbers can be defined as part of the programming image. The Cyclone increments and keeps track of the serial numbers in non-volatile memory.Different images can also share the same set of serial numbers
  • CYCLONE programmers support daisy chaining multiple ARM MCUs for debug or programming
  • ProCryption Security
    -Restrict Image Use
    -Keep Programming Images Secure
    -Encryption is Easy To Implement and Manage
  • SDHC接口支持SDHC卡,可满足更大存储需求
  • 软件和应用:

    创建镜像文件程序

    Cyclone Control Suite

    联机烧写软件:
    -PROG
    -CPROG

    其他软件:
    -Serial Number Creation Utility
    -Barcode Test Generator

CYCLONE-FX-UNIV
Advanced all-in-one program/debug/test interface for many ARM Cortex & NXP 8/16/32-bit devices. Enhanced speed/security/storage.
烧写、调试和测试多合一开发工具用于NXP8/16/32 和ARM Cortex 系列芯片。在烧写速度、加密和存储性能进一步提升。
  • 支持芯片系列:
    8-/16-/32-bit devices
    ARM Cortex devices
    NXP: S32
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
      LPC
    Atmel :
    SAMxxx
      Qorivva MPC5xxx
    Cypress:
    CCG2 , FM3 , PRoC-BLE , PSoC®4 , PSoC®5 , PSoC®6
      ColdFire V1
    Infineon:
    XMC
    ColdFire V2/3/4
    NordicSemi:
    nRF51, nRF52
      DSC
    OnBright:
    OB90Rxx
      HC(S)12(X)
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
      S12Z
    Silicon Labs :
    EFM32,EFR32,SiM3
      HCS08
    STMicroelectronics:
    STM32
      RS08
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
      HC08
    Toshiba:
    TX00,TX03,﹠TX04
      Power MPC5xx/8xx
      ARM Nexus(MAC7xxx)
    STMicro: SPC5,STM8(需搭配 Adapter使用)
功能:
  • USB,串口和以太网口三种计算机接口(Windows 2000/XP/Vista/7/8/10)
  • 1G内存,对存储的数值没有具体的限制
  • SDHC接口支持SDHC卡,可满足更大存储需求
  • 可与目标板高速通讯,最高可达25Mb/s
  • 4.3”触摸屏具有脱机烧写控制和设置功能
  • 通过继电器控制Cyclone "power-in" a和 "power-out"口的供电。也可通过调试排线向目标板供电
  • Auto-counting serial numbers can be defined as part of the programming image. The Cyclone increments and keeps track of the serial number for both internal images as well as SDCard images.
  • CYCLONE programmers support daisy chaining multiple ARM MCUs for debug or programming.
  • Dynamic Data:
    The CYCLONE FX can accept dynamic data provided by a PC for each programming operation which is programmed along with the data contained in a programming image.
  • ProCryption Security
    -Restrict Image Use
    -Keep Programming Images Secure
    -Encryption is Easy To Implement and Manage
  • 扩展加密:
    - 烧写控制限制
    - 数据区域限制镜像文件烧写
    - 防篡改技术
    - 内存数据保护和加密
  • 软件和应用:

    创建镜像文件程序

    Cyclone Control Suite

    联机烧写软件:
    -PROG
    -CPROG

    其他软件:
    -Serial Number Creation Utility
    -Barcode Test Generator

CYCLONE-LC-ARM
Production Programmer and Debug Probe for ARM® devices

用于ARM Cortex™-M的通用在线烧写设备

  • 支持的芯片系列:
    ARM Cortex devices:
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
    Atmel :
    SAMxxx
    Cypress:
    CCG2 , FM3 , PRoC-BLE , PSoC®4 , PSoC®5 , PSoC®6
    Infineon:
    XMC
    Nordic Semiconductor:
    nRF51,nRF52
    OnBright:
    OB90Rxx
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
    Silicon Labs :
    EFM32,EFR32,SiM3
    STMicroelectronics:
    STM32
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
    Toshiba:
    TX00,TX03,﹠TX04
  • USB,串口和以太网口三种计算机接口(Windows 2000/XP/vista/7/8/10)
  • 将多个微处理器程序存入Cyclone ,方便多个程序烧写
  • 预先烧写并通过LCD按钮或从PC远程控制。脱机烧写不需要PC
  • 液晶显示器在脱机使用时配合按键对Cyclone设置和控制
  • ProCryption Security
    -Restrict Image Use
    -Keep Programming Images Secure
    -Encryption is Easy To Implement and Manage
  • 随机软件:1.IP设置2.程序存储3.脱机烧写设置
功能:
  • 通过计算机交互模式烧写
  • 脱机使用
  • 计算机控制烧写
    多机控制
    错误诊断
    动态数据烧写
    镜像维护
  • 人工控制脱机烧写
  • Third-party API 第三方API
    可以使用第三方工具进行交互式编程和脱机操作。 P&E以UNIT 库形式公布了API。允许第三方开发人员通过串行,USB或以太网端口控制Cyclone.

USB-ML-ACP
USB Multilink Debug Probe for ARM® devices

特性:
  • 支持的芯片系列:
    ARM Cortex devices
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
    Atmel :
    SAMxxx
    Cypress:
    CCG2 , FM3 , PRoC-BLE , PSoC®4 , PSoC®5 , PSoC®6
    Infineon:
    XMC
    Nordic Semiconductor:
    nRF51,nRF52
    OnBright:
    OB90Rxx
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
    Silicon Labs :
    EFM32,EFR32,SiM3
    STMicroelectronics:
    STM32
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
    Toshiba:
    TX00,TX03,﹠TX04
  • 从PC到Multilink的USB接口允许快速,方便的编程和调试--通过方便和兼容的USB接口。
  • USB供电 -无需单独的电源供应(目标烧写小于1mA)。
  • 目标电压:1.8V-5.25V
  • 计算机USB接口 ( Windows 2000/XP/2003/Vista/7/8/10 )
  • Supports JTAG daisy chaining of multiple ARM MCUs.
  • Pipelined programming algorithms for some Power Architecture families that dramatically increase programming speed.
  • ARM device support includes both the JTAG and SWD protocols

PROGACMP
ARM Flash Programming Software for Multilink and Multink FX debug probes

Kinetis ARM 烧写软件

通过P&E BDM USB Multilink Universal转换接口(P&E USB-ML-UNIVERSAL(FX),连接到目标板 mini-10或 mini-20针JTAG接口上),在线烧写内外闪存软件。
功能:

  • 烧写 Program
  • 校验 Verify
  • 检查 Blank check
  • 上载 Upload
  • 显示 Display
  • 擦写 Erase

LIC-CYC-CTRL-ADV
Activates Advanced Automated Programming features on Cyclone Programmer

  • Add/Remove/Update many images in the Cyclone (Console, SDK, GUI)
  • Simultaneously (Gang) Control of multiple Cyclones via the USB, Serial, or Ethernet connections
  • Program (and Read) Dynamic Data in addition to fixed image data
  • Remote Display Access
  • Read/write Cyclone properties
  • Read Image and target Properties and Status
  • Compare images against a SAP file

LIC-CYC-SDCARD
SDHC port activation for external storage on Cyclone Programmer

  • 安装在Cyclone Programmer上激活SDHC端口
注:仅包含license,SDHC card 需单独购买
SDCARD
16 GB Encryped SDHC Flash Card for Cyclone
  • Easily be moved from Cyclone to Cyclone.
  • 16GB Encryptyed Cyclone SDHC Card is pre-formatted, tested, and certified to work with CYCLONE programmers.
注:需配套SDHC port License使用
LIC-CYC-PROCRYPTION
Cyclone LC Protected and Encrypted SAP Image Activation License
    It allows users to place protection on their programming images to restrict image use by date range or number of programs allowed. It also allows users to create RSA/AES encrypted programming images that use their own uniquely generated ImageKey. These images may only be used to program targets on Cyclones that are pre-configured with this unique ImageKey. This license keeps the user securely in control of both their IP and the programming process.
  • Restrict Image Use
  • Keep Programming Images Secure
  • Encryption is Easy To Implement and Manage

GDB Server Plug-In for Eclipse-based ARM IDEs
PEmicro plug-in for working with freely downloadable GDB Debugger

PEmicro's GDB Server Plug-In for Eclipse-based ARM IDEs is the piece which links the GDB debugger to PEmicro hardware, allowing debug and programming via USB, Serial, and Ethernet buses.

  • Real-Time Expression View
  • OS-Aware Feature Supports FreeRTOS
  • Multi-Core project debugging
  • Parallel debugging of multiple ARM devices
  • Preserve memory ranges across an erase
  • Trim Kinetis devices during programming
  • EEPROM partitioning capability during flash programming
  • SWD and JTAG : Both communications protocols are supported
  • JTAG daisy chain support
  • Attach to a running part during debug session
  • Attach to a running part during debug session
  • Semihosting : Simple way for target to send debug messages to the PC. To Eclipse or a Telnet client
  • Power Control : Many of PEmicro's debug interfaces can provide power to the target
  • Compatible PEmicro hardware interfaces include:

  • •Multilink ACP - development interface for ARM devices
    •Multilink Universal - all-in-one development interface and debug probe
    •Multilink Universal FX - Advanced high-speed all-in-one development interface and debug probe
    •Cyclone - series production programmers with stand-alone capability
    •Cyclone FX - series advanced high speed production programmers with stand-alone capability, speed, storage, security, and other enhancements
    •OpenSDA / Embedded OSJTAG- low-cost evaluation boards
Unit Library SDK for ARM® Cortex™-M processors

C/C++ and Delphi library modules which allow the creation of custom PC applications which use P&E hardware interfaces to control ARM® Cortex™-M processors via background debug mode

特性:

  • 通过Multilink Universal, Multilink Universal FX, CYCLONE-LC-UNIV, CYCLONE-FX-UNIV, CYCLONE-LC-ARM, Cyclone MAX, and Tracelink.工作
  • 提供BDM交互界面
  • 包含C和Delphi两种语言模块
  • 具有C和Delphi原代码和相应的可执行演示程序
  • 支持多种编译环境
  • UNITACMP and UNITACMP_DIST: Microsoft Visual C++ 5.0 或更高版本, Delphi 2.0 或更高版本
    • 开发平台 Windows 32-bit,Windows 64-bit (XP, Vista, 7,8,10).
  • 适用生产线测试