USB-ML-Universal
USB Multilink Universal Debug Probe for ARM® devices and 8/16/32 bit devices(software sold separately)

• Support device：Kinetis/S32, HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1/+V1, ColdFire V2-4, Qorivva MPC5xxx, DSC, STMicroelectronics' SPC56, and ARM devices .
• USB interface from PC to Multilink allows for fast, easy programming and debugging -- with the ease and compatibility of the USB interface.
• Draws power from USB interface-- no separate power supply required (draws less than 1mA from the target).
• Works with target voltage:1.8V-5.25V
• Supports JTAG daisy chaining of multiple ARM MCUs.
• ARM device support includes both the JTAG and SWD protocols.
• Includes USB cable, Type A Male to Type B Male, 6-ft.
• Pipelined programming algorithms for some Power Architecture families that dramatically increase programming speed.
• Auto-frequency detection + trimming capabilities for HCS08 devices.
• Auto-frequency detection for HC(S)12(X) devices.
• Generates programming voltage on RESET line for RS08 devices.
• Target Frequency: 16Khz-50Mhz (applies to HCS08, RS08, CFV1, S12Z, or HCS12X only)
• USB-ML-UNIVERSAL, Rev. E or later requires this RS08 adapter to allow the user to communicate with NXP's RS08 devices.

Note: Multilink debug probes do not include software, as there are myriad options regarding the device architecture and utility of software that the user might require.

USB-ML-Universal-FX
USB Multilink Universal FX High-Speed Debug Probe for ARM® devices and 8/16/32 bit devices(software sold separately)

• Support device： Kinetis/S32, HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1/+V1, ColdFire V2-4, Qorivva MPC5xxx, DSC, STMicroelectronics' SPC56, MPC5xx/8xx, HC16, 683xx and ARM devices .
• High-speed USB interface from PC to Multilink allows for fast, easy programming and debugging -- up to 10X faster than the other Multilink models.
• Can be used to power target MCU. Target Voltage: 3.3V, 5.0V
• I/O line clamping for added protection
• Draws power from USB interface-- no separate power supply required (draws less than 1mA from the target).
• Works with target voltage:1.8V-5.25V
• Supports JTAG daisy chaining of multiple ARM MCUs.
• ARM device support includes both the JTAG and SWD protocols
• Includes USB cable, Type A Male to Type B Male, 6-ft.
• Pipelined programming algorithms for some Power Architecture families that dramatically increase programming speed.
• Auto-frequency detection + trimming capabilities for HCS08 devices.
• Auto-frequency detection for HC(S)12(X) devices.
• Generates programming voltage on RESET line for RS08 devices.
• Target Frequency: 16Khz-50Mhz (applies to HCS08, RS08, CFV1, S12Z, or HCS12X only)
• USB-ML-UNIVERSAL-FX Rev. D or later requires this RS08 adapter to allow the user to communicate with NXP's RS08 devices.

Note: Multilink debug probes do not include software, as there are myriad options regarding the device architecture and utility of software that the user might require.

• Support device： Kinetis/S32, HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1/+V1, ColdFire V2-4, Qorivva MPC5xxx, DSC, HC08, MPC 5xx/8xx, STMicroelectronics' SPC56,ARM Cortex ,and STM8(with STM8 adapter),Infineon.

• Stand Alone Programming Images (SAP) Support - SAP Images are single file archives which contain all information, data, and algorithms necessary to program target devices with or without a PC
• Powerful Automation Control - PC based SDK, Console, and GUI Control, Gang Programming, Dynamic Data Programming
• Multiple Communications Interfaces- USB 2.0, Ethernet, and Serial interfaces
• Touchscreen LCD Display - Easy to use touch screen interface with remote access
• Target Power Management- Ability to provide and switch power to a target
• Auto-Counting & Shared Serial Numbers - Programming can incorporate sophisticated serialization
• Ethernet Based Debugging- Compatible with many development IDEs
• On-Board Storage - Encrypted internal memory, 16MB, 8 images
• Programming Control Port -10-pin port can launch programming, get status/results
• Cloud-Connected Programming Jobs (JOB) Support -Jobs are similar to images but use a connection to the Cloud to provide additional visibility, control, & logging via the free PEcloud service

• ProCryption Security
  - RSA/AES Encryption (Unique ImageKeys Safeguard Valuable IP)
  - Programming count/Date limits, etc. (Exercise Control Over Remote Operations)

• Support device： Kinetis/S32, HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1/+V1, ColdFire V2-4, Qorivva MPC5xxx, DSC, HC08, MPC 5xx/8xx, STMicroelectronics' SPC56,ARM Cortex , and STM8(with STM8 adapter),Infineon ,Renesas（with Renesas adapter）

• Stand Alone Programming Images (SAP) Support - SAP Images are single file archives which contain all information, data, and algorithms necessary to program target devices with or without a PC
• Powerful Automation Control - PC based SDK, Console, and GUI Control, Gang Programming, Dynamic Data Programming
• Multiple Communications Interfaces- USB 2.0, Ethernet, and Serial interfaces
• Touchscreen LCD Display - Easy to use touch screen interface with remote access
• Target Power Management- Ability to provide and switch power to a target
• Auto-Counting & Shared Serial Numbers - Programming can incorporate sophisticated serialization
• Ethernet Based Debugging- Compatible with many development IDEs
• Programming Control Port -10-pin port can launch programming, get status/results
• Cloud-Connected Programming Jobs (JOB) Support -Jobs are similar to images but use a connection to the Cloud to provide additional visibility, control, & logging via the free PEcloud service

• High Speed Programming - Download rates reaching 75 Mbits/s
• Larger On-Board Storage - 1+ Gigabyte of encrypted internal memory stores 200+ programming Images/Jobs
• External SDHC Memory - External memory via SDHC Card Port
• Advanced Testing Feature - Run Tests Prior to Programming
• Target Current and Voltage Measurement
• ProCryption Security
  - RSA/AES Encryption (Unique ImageKeys Safeguard Valuable IP)
  - Programming count/Date limits, etc. (Exercise Control Over Remote Operations)

PROG-HL-12Z (former PROG12Z)
68HC(S)12(X) (Does not support S12Z) Flash/EEPROM Programmer (Hardware License)

A command line version of the PROG12Z software which program/reprogram both internal and external flash devices in-circuit, via a six pin debug connector on the target processor system Programmer features include：

• Program
• Verify
• Blank check
• Upload
• Display
• Erase
• Show Data

ICD-HL-12Z (former ICD12Z)
68HC(S)12 In-Circuit Debugger Hardware License

• Paging support
• Hardware breakpoints for HCS12
• Full-speed in-circuit emulation
• Breakpoints with counters on the Nth execution
• Variables window showing many data types
• Realtime execution as well as multiple tracing model
• Startup and Macro files for automating the debug process
• Context-sensitive help for all commands
• Timing measurement and execution count functions
• Support for symbolic register files
• Full assembly source-level debugging
• C source-level debugging using ELF/DWARF v2.0 or ImageCraft v1.1 debug file format

It allows users to place protection on their programming images to restrict image use by date range or number of programs allowed. It also allows users to create RSA/AES encrypted programming images that use their own uniquely generated ImageKey. These images may only be used to program targets on Cyclones that are pre-configured with this unique ImageKey. This license keeps the user securely in control of both their IP and the programming process.
• Restrict Image Use
• Encrypted (eSAP) Programming Images
• Encryption is Easy To Implement and Manage

This allows users to add expandable and easily swappable storage for their programming images. Adding one or more SD cards to your programming setup can give you added flexibility, while encryption helps keep your IP safe. An SD card can easily be moved from Cyclone to Cyclone. Our 32GB Encryptyed Cyclone SDHC Card is pre-formatted, tested, and certified to work with CYCLONE FX programmers. The SDHC port features are not available on Cyclone LC.

NOTE: This is a legacy product. The latest builds of Cyclone LC have an SD Card slot in the case but NO INTERNAL HARDWARE for this card. Cyclone LC users who wish to purchase this SDHC port activation license should be sure that their Cyclone meets these reuqirements:
Cyclone LC Universal: Rev. B, Date code 0620 or earlier
Cyclone LC ARM: Rev. D, Date code 0620 or earlier
The date code is located on the bottom right of the Cyclone's rear label.

Note: This product includes the license only and does not contain an SDHC card. SDHC cards that are certified to work with PEmicro Cyclones are available separately. PEmicro Cyclones support a minimum of 4GB SDHC card.

CPRO_PWRSUPPLY

Cyclone Power Supply Replacement Part

• Input - 100-240V, 50-60Hz, 0.48A
• Output - 5.9V, 3.0A, 17.7W, Center positive
• 58.25 inches (148cm) cable length
• Barrel connector - 5.5mm outer diameter, 2.5mm inner diameter
• 5 interchangeable international adapters

PKG-HL-12Z （former PKG12Z_SW）
68HC(S)12 Development Package Hardware License

• PROG-HL-12Z Flash/EEPROM Programmer
• ICD-HL-12Z In-Circuit Debugger
• WinIDE Integrated Development Environment（IDE）
• REG12 Register Files

Cyclone Automated Control Package(Legacy)
Cyclone Automated Control Package with Dynamic Link Library (DLL)

• Multiple Cyclone Control
• Error Detection
• Dynamic Data Programming
• Image Maintenance
• Download the Basic Edition Package at no cost!

• Please note that the Cyclone PRO is no longer available. It has been replaced by the CYCLONE-LC-UNIV and CYCLONE-FX-UNIV production programmers. These programmers support all of the devices supported by Cyclone PRO and are recommended for new programming projects.

• The USB-ML-12 (USB BDM Multilink) has been replaced with the Multilink Universal interface. Most software products will support the Multilink Universal transparently.Other compatible interfaces include the high-speed Multilink Universal FX, CYCLONE programmer, and CYCLONE FX programmer.

BDM Multilink （Discontinued）
BDM Multilink Interface

• The BDM Multilink programmer connects to your PC's parallel port. For USB ports, we recommend the USB-ML-UNIVERSAL or USB-ML-UNIVERSAL-FX

Unit Library SDK for 68HC(S)12(X)
68HC(S)12 Hardware Interface Library Routines (SDK)

The package includes both C/C++ and PASCAL modules.The C and PASCAL modules come as sample source code。The library is very useful for building your own production line testers.The demo programs show you how to initialize the interface, program registers, download code and step through code.Starting with these programs it is easy to customize them to your specific requirements.

Key Features：

• Works with 68HC(S)12(X) architecture
• Works through P&E's USB-ML-Universal, Multilink Universal FX, CYCLONE-LC-UNIV , and CYCLONE-FX-UNIV
• Provides Interface to Background Debug Mode Included in the package are C/C++ and PASCAL modules
• Source and executables provided for both C and PASCAL demos
• Compilers supported:
  •UNITHCS08 and UNITHCS08_DIST: MicrosoftVisual C++ 5.0 or greater, Delphi 2.0 or greater,For Development platform: Windows 32-bit , Windows 64-bit (XP, Vista, 7,8,10).

Based on Window7/8/10 for command line assembler

• Macro Support
• S19 Object
• Conditional Assembly
• Include Files
• Full listing control with cycle counter

WINIDE
Windows Integrated Development Environment

Allows you to run external programs - including assemblers, C-compilers, debuggers, and flash programmers - in one environment, with a single hotkey for each. WinIDE comes installed with PEmicro's CASM assembler.

Editor features include:

• Fully Reconfigurable
• Allows execution of external programs
• On-screen help

Assembler features include:

• Macro support
• S19, HEX, IEEE695 objects
• Conditional assembly
• Include files
• Full listing control with cycle counter