P&E Tools Cosmic Software MetaGeek WSN

USB-ML-Universal
USB Multilink Universal Debug Probe for ARM® devices and 8/16/32 bit devices(software sold separately)

FEATURES:
  • Support device:Kinetis/S32, HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1/+V1, ColdFire V2-4, Qorivva MPC5xxx, DSC, STMicroelectronics' SPC56, and ARM devices .
  • USB interface from PC to Multilink allows for fast, easy programming and debugging -- with the ease and compatibility of the USB interface.
  • Draws power from USB interface-- no separate power supply required (draws less than 1mA from the target).
  • Target Voltage:1.8V-5.25V
  • Supports JTAG daisy chaining of multiple ARM MCUs.
  • Pipelined programming algorithms for some Power Architecture families that dramatically increase programming speed.
  • ARM device support includes both the JTAG and SWD protocols.
  • Includes USB cable, Type A Male to Type B Male, 6-ft.
  • Auto-frequency detection + trimming capabilities for HCS08 devices.
  • Auto-frequency detection for HC(S)12(X) devices.
  • Generates programming voltage on RESET line for RS08 devices.
  • USB-ML-UNIVERSAL, Rev. E or later requires this RS08 adapter to allow the user to communicate with NXP's RS08 devices.

Note: Multilink debug probes do not include software, as there are myriad options regarding the device architecture and utility of software that the user might require.

USB-ML-Universal-FX
USB Multilink Universal FX High-Speed Debug Probe for ARM® devices and 8/16/32 bit devices(software sold separately)

FEATURES:
  • Support device: Kinetis/S32, HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1/+V1, ColdFire V2-4, Qorivva MPC5xxx, DSC, STMicroelectronics' SPC56, MPC5xx/8xx, HC16, 683xx and ARM devices .
  • High-speed USB interface from PC to Multilink allows for fast, easy programming and debugging -- with the ease and compatibility of the USB interface.
  • Draws power from USB interface-- no separate power supply required (draws less than 1mA from the target).
  • Can be used to power target MCU.
  • Target Voltage:1.8V-5.25V
  • Target Frequency: 16Khz-50Mhz (applies to HCS08, RS08, CFV1, S12Z, or HCS12X only)
  • Supports JTAG daisy chaining of multiple ARM MCUs.
  • Pipelined programming algorithms for some Power Architecture families that dramatically increase programming speed.
  • I/O line clamping for added protection
  • Auto-frequency detection + trimming capabilities for HCS08 devices.
  • Auto-frequency detection for HC(S)12(X) devices.
  • Generates programming voltage on RESET line for RS08 devices.
  • ARM device support includes both the JTAG and SWD protocols

Note: Multilink debug probes do not include software, as there are myriad options regarding the device architecture and utility of software that the user might require.

CYCLONE-LC-UNIV
Production Programmer and Debug Probe for ARM® devices and NXP 8/16/32-bit devices
  • Support device: Kinetis/S32, HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1/+V1, ColdFire V2-4, Qorivva MPC5xxx, DSC, HC08, MPC 5xx/8xx, STMicroelectronics' SPC56,ARM Cortex ,and STM8(with STM8 adapter),Infineon.
Standard Cyclone Features:
  • Stand Alone Programming - Program targets with a PC or without a PC
  • Powerful Automation Control - PC based SDK, Console, and GUI Control, Gang Programming, Dynamic Data Programming
  • Multiple Communications Interfaces- USB 2.0, Ethernet, and Serial interfaces
  • Touchscreen LCD Display - Easy to use touch screen interface with remote access
  • Target Power Management- Ability to provide and switch power to a target
  • Auto-Counting & Shared Serial Numbers - Programming can incorporate sophisticated serialization
  • Ethernet Based Debugging- Compatible with many development IDEs
  • On-Board Storage - Encrypted internal memory, 16MB, 8 images
  • Programming Control Port -10-pin port can launch programming, get status/results
Optional upgrades for Cyclone LC:
  • ProCryption Security
    - RSA/AES Encryption (Unique ImageKeys Safeguard Valuable IP)
    - Programming count/Date limits, etc. (Exercise Control Over Remote Operations)
CYCLONE-FX-UNIV
Advanced all-in-one program/debug/test interface for many ARM Cortex & NXP 8/16/32-bit devices.
  • Support device: Kinetis/S32, HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1/+V1, ColdFire V2-4, Qorivva MPC5xxx, DSC, HC08, MPC 5xx/8xx, STMicroelectronics' SPC56,ARM Cortex , and STM8(with STM8 adapter),Infineon ,Renesas(with Renesas adapter
Standard Cyclone Features:
  • Stand Alone Programming - Program targets with a PC or without a PC
  • Powerful Automation Control - PC based SDK, Console, and GUI Control, Gang Programming, Dynamic Data Programming
  • Multiple Communications Interfaces- USB 2.0, Ethernet, and Serial interfaces
  • Touchscreen LCD Display - Easy to use touch screen interface with remote access
  • Target Power Management- Ability to provide and switch power to a target
  • Auto-Counting & Shared Serial Numbers - Programming can incorporate sophisticated serialization
  • Ethernet Based Debugging- Compatible with many development IDEs
  • Programming Control Port -10-pin port can launch programming, get status/results
Cyclone FX Advanced Features:
  • High Speed Programming Target - Download rates reaching 75 Mbits/s
  • Larger On-Board Storage - 1+ Gigabyte of encrypted internal memory stores 200+ programming images
  • External SDHC Memory - External memory via SDHC Card Port
  • Advanced Testing Feature - Run Tests Prior to Programming
  • Target Current and Voltage Measurement
  • ProCryption Security
    - RSA/AES Encryption (Unique ImageKeys Safeguard Valuable IP)
    - Programming count/Date limits, etc. (Exercise Control Over Remote Operations)
ML-MLFX-RS08-ADPT
Multilink Adapter for RS08 devices
  • the adapter connects to the 16-pin header (Port E) of the Multink Universal. The adapter then offers a 6-pin header for connection to the target via ribbon cable.
PROG-HL-RS08(former PROGRS08Z)
RS08 Full Featured Flash Programmer Hardware License

PROGRS08 Programming Software allows you to program/reprogram flash devices in-circuit, via a six pin debug connector on the target processor system.

  • Program
  • Verify
  • Blank check
  • Upload
  • Display
  • Erase
  • Show Data

ICD-HL-RS08Z (former ICDRS08Z)
RS08 Family In-Circuit Debugger Hardware License

  • Full-speed in-circuit emulation
  • Breakpoints with counters on the Nth execution
  • Variables window showing many data types
  • Realtime execution as well as multiple tracing model
  • Startup and Macro files for automating the debug process
  • Context-sensitive help for all commands
  • Timing measurement and execution count functions
  • Support for symbolic register files
  • Full assembly source-level debugging
  • C source-level debugging based on the Elf/Dwarf 2.0 ,IEEE695 specification
LIC-CYC-PROCRYPTION
Cyclone LC Protected and Encrypted SAP Image Activation License
    It allows users to place protection on their programming images to restrict image use by date range or number of programs allowed. It also allows users to create RSA/AES encrypted programming images that use their own uniquely generated ImageKey. These images may only be used to program targets on Cyclones that are pre-configured with this unique ImageKey. This license keeps the user securely in control of both their IP and the programming process.
  • Restrict Image Use
  • Encrypted (eSAP) Programming Images
  • Encryption is Easy To Implement and Manage
SDCARD
32 GB Encryped SDHC Flash Card for Cyclone FX

    This allows users to add expandable and easily swappable storage for their programming images. Adding one or more SD cards to your programming setup can give you added flexibility, while encryption helps keep your IP safe. An SD card can easily be moved from Cyclone to Cyclone. Our 32GB Encryptyed Cyclone SDHC Card is pre-formatted, tested, and certified to work with CYCLONE FX programmers. The SDHC port features are not available on Cyclone LC.

CPRO_PWRSUPPLY

Cyclone Power Supply Replacement Part

  • Input - 100-240V, 50-60Hz, 0.48A
  • Output - 5.9V, 3.0A, 17.7W, Center positive
  • 58.25 inches (148cm) cable length
  • Barrel connector - 5.5mm outer diameter, 2.5mm inner diameter
  • 5 interchangeable international adapters
PKG-HL-RS08(former PKGRS08_SW)
RS08 Development Package Hardware License
  • PROG-HL-RS08Z Flash/EEPROM Programmer
  • ICD-HL-RS08Z In-Circuit Debugger
  • WINIDEIntegrated Development Environment(IDE)
    include:
    • CasmRS08_PRO Command-Line Assembler
    • P&E's Full Chip RS08 Simulator
  • REG08 Register Files View and Edit

Cyclone Automated Control Package(Legacy)
Cyclone Automated Control Package with Dynamic Link Library (DLL)

Cyclone PRO (Discontinued)
Hardware Debug Interface and Stand-Alone Programmer
  • Please note that the Cyclone PRO is no longer available. It has been replaced by the CYCLONE-LC-UNIV and CYCLONE-FX-UNIV production programmers. These programmers support all of the devices supported by Cyclone PRO and are recommended for new programming projects.
USB-ML-12 (Discontinued)
68HC(S)12(X)/68HCS08/68RS08/S12Z ,ColdFire V1 BDM Interface (USB 2.0)
  • The USB-ML-12 (USB BDM Multilink) has been replaced with the Multilink Universal interface. Most software products will support the Multilink Universal transparently.Other compatible interfaces include the high-speed Multilink Universal FX, CYCLONE programmer, and CYCLONE FX programmer.

CASM Command-Line Assembler
Command-Line Assembler

Based on Window7/8/10 for command line assembler

  • Full String Replacement Macro Support
  • Motorola S-Record Object Files
  • Uses Freescale Opcode Formats
  • Conditional Assembly
  • Include Files
  • Full listing control with cycle counter
  • Segmentation
  • P&E Map Debug Files

Unit Library SDK for RS08
C/C++ and Delphi library modules which allow the creation of custom PC applications which use P&E hardware interfaces to control RS08 processors via background debug mode.

The package includes both C/C++ and Delphi modules. The C and Delphi modules in the software package come as sample source code, which interfaces with the Windows DLL to drive the hardware cable. The RS08 library is very useful for building your own production line testers. The demo programs included in the package show you how to initialize the interface, program registers, download code to RAM and step through code. Starting with these programs it is easy to customize them to your specific requirements. Applications created with the included 32-bit .DLL will also operate on the 64-bit operating systems listed below under System Requirements.

Key Features:

  • Works with NXP's RS08 architecture
  • Works through P&E's USB-ML-Universal, Multilink Universal FX, CYCLONE-LC-UNIV , CYCLONE-FX-UNIV
  • Also supports P&E's DEVRS08KA2 and NXP's DEMO9RS08LA8, DEMO9RS08LE4, and DEMO9RS08KB12 development boards (available through NXP)
  • Provides Interface to Background Debug Mode Included in the package are C/C++ and Delphi modules
  • Source and executables provided for both C and Delphi demos
  • Compilers supported:
    UNITRS08 and UNITRS08_DIST: MicrosoftVisual C++ 5.0 or greater, Delphi 2.0 or greater
    Development platform: Windows 32-bit , Windows 64-bit (XP, Vista, 7,8,10).
NOTE:Very useful for building production line testers

WINIIDE
Windows Integrated Development Environment

WINIDERS08 allows you to run external programs - including assemblers, C-compilers, debuggers, and flash programmers - in one environment, with a single hotkey for each.

Include:

  • CasmRS08_PROCommand-Line Assembler

    P&E's Full Chip RS08 Simulator

    REG08Register Files View and Edit

Editor features include:

  • Fully Reconfigurable
  • Allows execution of external programs
  • On-screen help CasmRS08_PRO Assembler features include:
  • Full String Replacement Macro Support
  • Motorola S-Record Object Files
  • Uses Freescale Opcode Formats
  • Conditional Assembly
  • Include Files
  • Full listing control with cycle counter
  • Segmentation
  • P&E Map Debug Files