P&E Tools Cosmic Software MetaGeek WSN

USB-ML-Universal-FX
USB Multilink Universal FX High-Speed Debug Probe for ARM® devices and 8/16/32 bit devices: NXP's: Kinetis, LPC, S32, Qorivva, MPC5xx/8xx, Coldfire, DSC, S12Z, RS08, S08, HC(S)12(X), and STMicroelectronics SPC5 MCU's

FEATURES:
  • Support device:
    8-/16-/32-bit devices
    ARM Cortex devices
    NXP: S32
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
      LPC
    Atmel :
    SAMxxx
      Qorivva MPC5xxx
    Cypress:
    CCG2 , FM3 , PRoC-BLE , PSoC®4 , PSoC®5 , PSoC®6
      ColdFire V1
    Infineon:
    XMC
    ColdFire V2/3/4
    NordicSemi:
    nRF51, nRF52
      DSC
    OnBright:
    OB90Rxx
      HC(S)12(X)
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
      S12Z
    Silicon Labs :
    EFM32,EFR32,SiM3
      HCS08
    STMicroelectronics:
    STM32
      RS08
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
      HC16
    Toshiba:
    TX00,TX03,﹠TX04
      CPU3xx    
      Power MPC5xx/8xx
    STMicro: SPC5
  • High-speed USB interface from PC to Multilink allows for fast, easy programming and debugging -- with the ease and compatibility of the USB interface.
  • Draws power from USB interface-- no separate power supply required (draws less than 1mA from the target).
  • Can be used to power target MCU.
  • Target Voltage:1.8V-5.25V
  • Target Frequency: 16Khz-50Mhz (applies to HCS08, RS08, CFV1, S12Z, or HCS12X only)
  • Supports JTAG daisy chaining of multiple ARM MCUs.
  • Pipelined programming algorithms for some Power Architecture families that dramatically increase programming speed.
  • I/O line clamping for added protection
  • Auto-frequency detection + trimming capabilities for HCS08 devices.
  • Auto-frequency detection for HC(S)12(X) devices.
  • Generates programming voltage on RESET line for RS08 devices.
  • ARM device support includes both the JTAG and SWD protocols
CYCLONE-LC-UNIV
Production Programmer and Debug Probe for ARM® devices and NXP 8/16/32-bit devices
  • Support device:
    8-/16-/32-bit devices
    ARM Cortex devices
    NXP: S32
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
      LPC
    Atmel :
    SAMxxx
      Qorivva MPC5xxx
    Cypress:
    CCG2 , FM3 , PRoC-BLE , PSoC®4 , PSoC®5 , PSoC®6
      ColdFire V1
    Infineon:
    XMC
    ColdFire V2/3/4
    NordicSemi:
    nRF51, nRF52
      DSC
    OnBright:
    OB90Rxx
      HC(S)12(X)
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
      S12Z
    Silicon Labs :
    EFM32,EFR32,SiM3
      HCS08
    STMicroelectronics:
    STM32
      RS08
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
      HC08
    Toshiba:
    TX00,TX03,﹠TX04
      Power MPC5xx/8xx
      ARM Nexus(MAC7xxx)
    STMicro: SPC5,STM8(with Adapter)
FUNCTIONS:
  • USB 2.0,Ethernet, and Serial interfaces (Windows 2000/XP/vista/7/8/10).
  • 16MB internal memory. Onboard Cyclone memory stores up to 8 images.
  • Allows switching of the target's power supply via Cyclone "power-in" and "power-out" jacks. On-board electromechanical relays handle the power switching. Power can also be provided to the target via the debug connection.
  • The 4.3" touchscreen display, in conjunction with the status LEDs and Start button, allows stand-alone control and configuration of the Cyclone.
  • Auto-counting serial numbers can be defined as part of the programming image. The Cyclone increments and keeps track of the serial numbers in non-volatile memory.Different images can also share the same set of serial numbers
  • CYCLONE programmers support daisy chaining multiple ARM MCUs for debug or programming.
  • ProCryption Security
    -Restrict Image Use
    -Keep Programming Images Secure
    -Encryption is Easy To Implement and Manage
  • The SDHC port supports SDHC memory cards, for added storage capacity and flexibility
  • software and utilities:

    Image Creation Utility

    Cyclone Control Suite

    Interactive Programming Software:
    -PROG
    -CPROG

    Other Utilities:
    -Serial Number Creation Utility
    -Barcode Test Generator

CYCLONE-FX-UNIV
Advanced all-in-one program/debug/test interface for many ARM Cortex & NXP 8/16/32-bit devices. Enhanced speed/security/storage.
  • Support device:
    8-/16-/32-bit devices
    ARM Cortex devices
    NXP: S32
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
      LPC
    Atmel :
    SAMxxx
      Qorivva MPC5xxx
    Cypress:
    CCG2 , FM3 , PRoC-BLE , PSoC®4 , PSoC®5 , PSoC®6
      ColdFire V1
    Infineon:
    XMC
    ColdFire V2/3/4
    NordicSemi:
    nRF51, nRF52
      DSC
    OnBright:
    OB90Rxx
      HC(S)12(X)
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
      S12Z
    Silicon Labs :
    EFM32,EFR32,SiM3
      HCS08
    STMicroelectronics:
    STM32
      RS08
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
      HC08
    Toshiba:
    TX00,TX03,﹠TX04
      Power MPC5xx/8xx
      ARM Nexus(MAC7xxx)
    STMicro: SPC5,STM8(with Adapter)
FUNCTIONS:
  • USB 2.0,Ethernet, and Serial interfaces (Windows 2000/XP/vista/7/8/10).
  • No practical limit to number of images stored in 1GB of onboard Cyclone memory.
  • External SDHC Card Support.The card can then store programming images and associated data (such as serial numbers, programming counts, etc). SD Cards can be moved between Cyclones.
  • High Speed Target Communications.Supports extremely fast download rates of up to 25Mb/s.
  • Supports switching of the target's power supply via Cyclone FX "power-in" and "power-out" jacks. On-board electromechanical relays handle the power switching. Power can also be provided to the target via the debug connection.
  • The 4.3" touchscreen display, in conjunction with the status LEDs and Start button, allows stand-alone control and configuration of the Cyclone FX.
  • Auto-counting serial numbers can be defined as part of the programming image. The Cyclone increments and keeps track of the serial number for both internal images as well as SDCard images.
  • CYCLONE programmers support daisy chaining multiple ARM MCUs for debug or programming.
  • ProCryption Security
    -Restrict Image Use
    -Keep Programming Images Secure
    -Encryption is Easy To Implement and Manage
  • Dynamic Data:
    The CYCLONE FX can accept dynamic data provided by a PC for each programming operation which is programmed along with the data contained in a programming image.
  • Extended Security Features:
    - Limit # of programming operations
    - Limit image programming to a date range
    - Anti-tamper technology
    - Internal memory protection & encryption
  • software and utilities:

    Image Creation Utility

    Cyclone Control Suite

    Interactive Programming Software:
    -PROG
    -CPROG

    Other Utilities:
    -Serial Number Creation Utility
    -Barcode Test Generator

PROGPPCZ
PowerPC Flash/EEPROM Programmer

PROGPPCZ Programmer allows program/reprogram external flash devices in-circuit, via P&E's a 10-pin BDM connector on the target system.

  • Program
  • Verify
  • Blank check
  • Upload
  • Display
  • Erase

ICDPPCZ
PowerPC In-Circuit Debugger

ased on Window98 / ME/NT/2000/XP for debugging code to give the user access to all on-chip resources。

  • Full-speed in-circuit emulation
  • Breakpoints with counters on the Nth execution
  • Variables window showing many data types
  • Realtime execution as well as multiple tracing model
  • Startup and Macro files for automating the debug process
  • Context-sensitive help for all commands
  • Timing measurement and execution count functions
  • Support for symbolic register files
  • Full assembly source-level debugging
  • C source-level debugging based on IEEE695 format

Advanced Cyclone Control Suite Upgrade License
Advanced Automated Programming Upgrade License for Cyclone

  • Add/Remove/Update many images in the Cyclone (Console, SDK, GUI)
  • Simultaneously (Gang) Control of multiple Cyclones via the USB, Serial, or Ethernet connections
  • Program (and Read) Dynamic Data in addition to fixed image data
  • Remote Display Access
  • Read/write Cyclone properties
  • Read Image and target Properties and Status

LIC-CYC-SDCARD
SDHC port activation for external storage on Cyclone Programmer

  • This license is installed onto a PEmicro's CYCLONE programmer to activate the SDHC Port
Note: This product includes the license only and does not contain an SDHC card. SDHC cards that are certified to work with PEmicro Cyclones are available separately.
SDCARD
16 GB Encryped SDHC Flash Card for Cyclone FX

    This allows users to add expandable and easily swappable storage for their programming images. Adding one or more SD cards to your programming setup can give you added flexibility, while encryption helps keep your IP safe. An SD card can easily be moved from Cyclone to Cyclone. Our 16GB Encryptyed Cyclone SDHC Card is pre-formatted, tested, and certified to work with CYCLONE FX programmers.

LIC-CYC-PROCRYPTION
Cyclone LC Protected and Encrypted SAP Image Activation License
    It allows users to place protection on their programming images to restrict image use by date range or number of programs allowed. It also allows users to create RSA/AES encrypted programming images that use their own uniquely generated ImageKey. These images may only be used to program targets on Cyclones that are pre-configured with this unique ImageKey. This license keeps the user securely in control of both their IP and the programming process.
  • Restrict Image Use
  • Keep Programming Images Secure
  • Encryption is Easy To Implement and Manage
注:需配套Cyclone-LC-UNIV使用

Cyclone Automated Control Package
Cyclone Automated Control Package with Dynamic Link Library (DLL)

CompactFlash Activation License + Flash Card
Activates the CompactFlash feature of the Manage Images utility

Using the CompactFlash interface allows for programming of larger datasets, and for the storage of multiple programming images on the CompactFlash card.

  • Maximizes Image Storage Capability
  • Compact Flash Image Management
  • Compact Flash Multiple Image Support
  • Mutliple Field Updates

PKGPPCZ_SW

PowerPC BDM Development Package (USB Interface And Software)

CAB_RIBBON_10-PIN
10-Pin Ribbon Cable for 68HC16/683xx/PowerPC

Cyclone MAX (Discontinued)
Stand-Alone Programmer and Hardware Debug Interface for ColdFire V2/V3/V4, Power MPC5xx/8xx, Qorivva MPC55xx/MPC56xx/MPC57xx & STMicroelectronics SPC56, Kinetis ARM® processor-based MCUs (includes L-Series), DSC , and MAC7xxx ARM® processor-based MCUs.
  • Please note that the Cyclone MAX is no longer available. It has been replaced by the CYCLONE-LC-UNIV and CYCLONE-FX-UNIV production programmers. These programmers support all of the devices supported by Cyclone PRO and are recommended for new programming projects.

USB-ML-PPCBDM (Discontinued)
PoweC 5xx/8xx BDM Interface (USB)

    The USB-ML-PPCBDM interface is discontinued. The replacement options for this part will be PEmicro's high-speed USB-ML-UNIVERSAL-FX. Older software will need an upgrade to use the FX.

CABLE_PPC(Discontinued)
PowerPC BDM Interface

    The CABLE_PPC interface has been discontinued. The replacement part for this unit is the Multilink Universal FX (for development), and CYCLONE-LC-UNIV or CYCLONE-FX-UNIV (for production)

CASMPPCZ
PowerPC Command-Line Assembler

  • Macro support
  • S19 objects
  • Conditional assembly
  • Include files
  • Full listing control with cycle counter

Unit Library SDK for Power® MPC5xx/8xx
PowerPC Hardware Interface Library Routines (SDK)

The package includes both C/C++ and PASCAL modules.The package consists of an interface DLL/SO and sample code。The C and PASCAL modules in the software package come as sample source code,The library is very useful for building your own production line testers.The demo programs show you how to initialize the interface, program registers, download code and step through code.Starting with these programs it is easy to customize them to your specific requirements.

Key Features:

  • Works with all PowerPC microcontrollers
  • Works with Works through P&E's Cable PPC, USB-ML-PPC, Multilink Universal FX, CYCLONE-LC-UNIV, CYCLONE-FX-UNIV, and Cyclone MAX.
  • Provides Interface to Background Debug Mode
  • Included in the package are C/C++ and PASCAL modules
  • Source and executables provided for both C and PASCAL demos
  • Number of functions in the library - 38
  • Compilers supported:
    • UNITPPCZ and UNITPPCZ_DIST: MicrosoftVisual C++, Delphi 2.0 or greater,Development platforms: 32- and 64-bit Windows (95/98/NT)
    • UNITPPCZ-LINUX and UNITPPCZ-LINUX-DIST: GNU Compiler Collection and Sun Compiler Collection For x84 Kernels: 2.2.x-2.6.x
  • UNITPPCZ library is very useful for building custom test, calibration, and update applications
GNU Compiler Collection and Sun Compiler Collection.
WinIDEPPCZ
PowerPC Windows Intergrated Development Environment

WINIDEPPCZ allows you to run external programs - including assemblers, C-compilers, debuggers, and flash programmers - in one environment, with a single hotkey for each. WINIDE32Z comes installed with P&E's CASMPPCZ assembler.

Editor features include:

  • Fully Reconfigurable
  • Allows execution of external programs
  • On-screen help

Assembler features include:

  • Macro support
  • S19, HEX, IEEE695 objects
  • Conditional assembly
  • Include files
  • Full listing control with cycle counter