P&E Tools Cosmic Software MetaGeek WSN

USB-ML-Universal
USB Multilink Universal Debug Probe for ARM® devices and 8/16/32 bit devices(software sold separately)

FEATURES:
  • Support device:Kinetis/S32, HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1/+V1, ColdFire V2-4, Qorivva MPC5xxx, DSC, STMicroelectronics' SPC56, and ARM devices .
  • USB interface from PC to Multilink allows for fast, easy programming and debugging -- with the ease and compatibility of the USB interface.
  • Draws power from USB interface-- no separate power supply required (draws less than 1mA from the target).
  • Target Voltage:1.8V-5.25V
  • Supports JTAG daisy chaining of multiple ARM MCUs.
  • Pipelined programming algorithms for some Power Architecture families that dramatically increase programming speed.
  • ARM device support includes both the JTAG and SWD protocols.
  • Includes USB cable, Type A Male to Type B Male, 6-ft.
  • Auto-frequency detection + trimming capabilities for HCS08 devices.
  • Auto-frequency detection for HC(S)12(X) devices.
  • Generates programming voltage on RESET line for RS08 devices.
  • USB-ML-UNIVERSAL, Rev. E or later requires this RS08 adapter to allow the user to communicate with NXP's RS08 devices.

Note: Multilink debug probes do not include software, as there are myriad options regarding the device architecture and utility of software that the user might require.

USB-ML-Universal-FX
USB Multilink Universal FX High-Speed Debug Probe for ARM® devices and 8/16/32 bit devices(software sold separately)

FEATURES:
  • Support device: Kinetis/S32, HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1/+V1, ColdFire V2-4, Qorivva MPC5xxx, DSC, STMicroelectronics' SPC56, MPC5xx/8xx, HC16, 683xx and ARM devices .
  • High-speed USB interface from PC to Multilink allows for fast, easy programming and debugging -- with the ease and compatibility of the USB interface.
  • Draws power from USB interface-- no separate power supply required (draws less than 1mA from the target).
  • Can be used to power target MCU.
  • Target Voltage:1.8V-5.25V
  • Target Frequency: 16Khz-50Mhz (applies to HCS08, RS08, CFV1, S12Z, or HCS12X only)
  • Supports JTAG daisy chaining of multiple ARM MCUs.
  • Pipelined programming algorithms for some Power Architecture families that dramatically increase programming speed.
  • I/O line clamping for added protection
  • Auto-frequency detection + trimming capabilities for HCS08 devices.
  • Auto-frequency detection for HC(S)12(X) devices.
  • Generates programming voltage on RESET line for RS08 devices.
  • ARM device support includes both the JTAG and SWD protocols

Note: Multilink debug probes do not include software, as there are myriad options regarding the device architecture and utility of software that the user might require.

CYCLONE-LC-UNIV
Production Programmer and Debug Probe for ARM® devices and NXP 8/16/32-bit devices
  • Support device: Kinetis/S32, HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1/+V1, ColdFire V2-4, Qorivva MPC5xxx, DSC, HC08, MPC 5xx/8xx, STMicroelectronics' SPC56,ARM Cortex ,and STM8(with STM8 adapter),Infineon.
Standard Cyclone Features:
  • Stand Alone Programming - Program targets with a PC or without a PC
  • Standard Automated Control - PC based SDK, Console, and GUI Control
  • Multiple Communications Interfaces- USB 2.0, Ethernet, and Serial interfaces
  • Touchscreen LCD Display - Easy to use touch screen interface with remote access
  • Target Power Management- Ability to provide and switch power to a target
  • Auto-Counting & Shared Serial Numbers - Programming can incorporate sophisticated serialization
  • Ethernet Based Debugging- Compatible with many development IDEs
  • On-Board Storage - Encrypted internal memory, 16MB, 8 images
  • Programming Control Port -10-pin port can launch programming, get status/results
Optional upgrades for Cyclone LC:
CYCLONE-FX-UNIV
Advanced all-in-one program/debug/test interface for many ARM Cortex & NXP 8/16/32-bit devices.
  • Support device: Kinetis/S32, HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1/+V1, ColdFire V2-4, Qorivva MPC5xxx, DSC, HC08, MPC 5xx/8xx, STMicroelectronics' SPC56,ARM Cortex , and STM8(with STM8 adapter),Infineon ,Renesas(with Renesas adapter
Standard Cyclone Features:
  • Stand Alone Programming - Program targets with a PC or without a PC
  • Standard Automated Control - PC based SDK, Console, and GUI Control
  • Multiple Communications Interfaces- USB 2.0, Ethernet, and Serial interfaces
  • Touchscreen LCD Display - Easy to use touch screen interface with remote access
  • Target Power Management- Ability to provide and switch power to a target
  • Auto-Counting & Shared Serial Numbers - Programming can incorporate sophisticated serialization
  • Ethernet Based Debugging- Compatible with many development IDEs
  • Programming Control Port -10-pin port can launch programming, get status/results
Cyclone FX Advanced Features:
  • High Speed Programming Target - Download rates reaching 75 Mbits/s
  • Larger On-Board Storage - 1+ Gigabyte of encrypted internal memory stores 200+ programming images
  • Target Current and Voltage Measurement
  • ProCryption Security - RSA./AES encryption, programming count/Date limits, etc.
  • Advanced Automation Control - Advanced Feature Set includes Gang Programming, Dynamic Data Programming
  • External SDHC Memory - External memory via SDHC Card Port

PROG-HL-HCS08(former PROGHCS08)
68HCS08 Flash/EEPROM Programmer Hardware License

A command line version of the PROGHCS08 software which program/reprogram both internal and external flash devices in-circuit, via a six pin debug connector on the target processor system Programmer features include:

  • Program
  • Verify
  • Blank check
  • Upload
  • Display
  • Erase
  • Show Data

ICD-HL-HCS08 (former ICDHCS08)
68HCS08 In-Circuit Debugger Hardware License

  • Full-speed in-circuit emulation
  • Breakpoints with counters on the Nth execution
  • Variables window showing many data types
  • Realtime execution as well as multiple tracing model
  • Startup and Macro files for automating the debug process
  • Context-sensitive help for all commands
  • Timing measurement and execution count functions
  • Support for symbolic register files
  • Full assembly source-level debugging
  • C source-level debugging using ELF/DWARF v2.0 or ImageCraft v1.1 debug file format

LIC-CYC-CTRL-ADV
Cyclone LC Control Advanced Automation License

  • Simultaneously (Gang) Control of multiple Cyclones via the USB, Serial, or Ethernet connections
  • Add/Remove/Update many images in the Cyclone (Console, SDK, GUI)
  • Program (and Read) Dynamic Data in addition to fixed image data
  • Specify Overlay Program Data
  • Compare images against a SAP file

LIC-CYC-SDCARD
SD Card Port Activation License for Cyclone LC

  • This license is installed onto a PEmicro's CYCLONE LC programmer to activate the SDHC Port
Note: This product includes the license only and does not contain an SDHC card. SDHC cards that are certified to work with PEmicro Cyclones are available separately.
SDCARD
32 GB Encryped SDHC Flash Card for Cyclone

    This allows users to add expandable and easily swappable storage for their programming images. Adding one or more SD cards to your programming setup can give you added flexibility, while encryption helps keep your IP safe. An SD card can easily be moved from Cyclone to Cyclone. Our 32GB Encryptyed Cyclone SDHC Card is pre-formatted, tested, and certified to work with CYCLONE FX programmers.

LIC-CYC-PROCRYPTION
Cyclone LC Protected and Encrypted SAP Image Activation License
    It allows users to place protection on their programming images to restrict image use by date range or number of programs allowed. It also allows users to create RSA/AES encrypted programming images that use their own uniquely generated ImageKey. These images may only be used to program targets on Cyclones that are pre-configured with this unique ImageKey. This license keeps the user securely in control of both their IP and the programming process.
  • Restrict Image Use
  • Keep Programming Images Secure
  • Encryption is Easy To Implement and Manage
注:需配套Cyclone-LC-UNIV使用

Cyclone Automated Control Package(Legacy)
Cyclone Automated Control Package with Dynamic Link Library (DLL)

CompactFlash Activation License + Flash Card(Legacy)
Activates the CompactFlash feature of the Manage Images utility

Using the CompactFlash interface allows for programming of larger datasets, and for the storage of multiple programming images on the CompactFlash card.

  • Maximizes Image Storage Capability
  • Compact Flash Image Management
  • Compact Flash Multiple Image Support
  • Mutliple Field Updates
PKG-HL-HCS08(former PKGHCS08_SW)
68HCS08 Development Package Hardware License
Cyclone PRO (Discontinued)
Hardware Debug Interface and Stand-Alone Programmer
  • Please note that the Cyclone PRO is no longer available. It has been replaced by the CYCLONE-LC-UNIV and CYCLONE-FX-UNIV production programmers. These programmers support all of the devices supported by Cyclone PRO and are recommended for new programming projects.
USB-ML-12 (Discontinued)
68HC(S)12(X)/68HCS08/68RS08/S12Z ,ColdFire V1 BDM Interface (USB 2.0)
  • The USB-ML-12 (USB BDM Multilink) has been replaced with the Multilink Universal interface. Most software products will support the Multilink Universal transparently.Other compatible interfaces include the high-speed Multilink Universal FX, CYCLONE programmer, and CYCLONE FX programmer.

BDM Multilink (Discontinued)
BDM Multilink Interface

  • The BDM Multilink programmer connects to your PC's parallel port. For USB ports, we recommend the USB-ML-UNIVERSAL or USB-ML-UNIVERSAL-FX

Unit Library SDK for 68HCS08
UNITHCS08 68HCS08 Hardware Interface Library Routines (SDK)

The package includes both C/C++ and PASCAL modules.

The C and PASCAL modules come as sample source code。

The library is very useful for building your own production line testers.

The demo programs show you how to initialize the interface, program registers, download code and step through code.

Starting with these programs it is easy to customize them to your specific requirements

Key Features:

  • Works with 68HCS08 architecture
  • Works through P&E's USB-ML-Multilink Universal, Multilink Universal FX, CYCLONE-LC-UNIV , CYCLONE-FX-UNIV
  • Provides Interface to Background Debug Mode Included in the package are C/C++ and PASCAL modules
  • Source and executables provided for both C and PASCAL demos
  • Number of functions in the library - 23
  • Compilers supported:

    UNITHCS08 and UNITHCS08_DIST: MicrosoftVisual C++ 5.0 or greater,Delphi 2.0 or greater,For Development platform: Windows 32-bit, Windows 64-bit (XP, Vista, 7,8,10)

    UNITHCS08-LINUX and UNITHCS08-LINUX-DIST: GNU Compiler,Collection and Sun Compiler Collection,For x84 Kernels: 2.2.x-2.6.x

NOTE:Very useful for building production line testers

CasmHCS08
68HCS08 Command-Line Assembler

  • Macro Support
  • S19 Object
  • Conditional Assembly
  • Include Files
  • Full listing control with cycle counter

CasmHCS08_Pro
68HCS08 Command-Line Assembler

  • Full String Replacement Macro Support
  • Motorola S-Record Object Files
  • Uses NXP Opcode Formats
  • Conditional Assembly
  • Include Files
  • Full listing control with cycle counter
  • Segmentation
  • P&E Map Debug Files

WINIDEHCS08
68HCS08 Windows Integrated Development Environment

WinIDE08Z allows you to run external programs - including assemblers, C-compilers, debuggers, and flash programmers - in one environment, with a single hotkey for each. WinIDE08Z comes installed with P&E's CASMHCS08 assembler

Editor features include:

  • Fully Reconfigurable
  • Allows execution of external programs
  • On-screen help

Assembler features include:

  • Macro support
  • S19, HEX, IEEE695 objects
  • Conditional assembly
  • Include files
  • Creates list and map files during assembly
  • Full listing control with cycle counter