P&E Tools Cosmic Software MetaGeek WSN

USB-ML-Universal-FX
USB Multilink Universal FX High-Speed Debug Probe for ARM® devices and 8/16/32 bit devices: NXP's: Kinetis, LPC, S32, Qorivva, MPC5xx/8xx, Coldfire, DSC, S12Z, RS08, S08, HC(S)12(X), and STMicroelectronics SPC5 MCU's

FEATURES:
  • Support device:
    8-/16-/32-bit devices
    ARM Cortex devices
    NXP: S32
    NXP :
    Kinetis,LPC,Automotive ,iMX,Sensors,Vybrid
      LPC
    Atmel :
    SAMxxx
      Qorivva MPC5xxx
    Cypress:
    CCG2 , FM3 , PRoC-BLE , PSoC®4 , PSoC®5 , PSoC®6
      ColdFire V1
    Infineon:
    XMC
    ColdFire V2/3/4
    NordicSemi:
    nRF51, nRF52
      DSC
    OnBright:
    OB90Rxx
      HC(S)12(X)
    Silergy(Maxim) :
    MAX716xx,AM0x,AM1x
      S12Z
    Silicon Labs :
    EFM32,EFR32,SiM3
      HCS08
    STMicroelectronics:
    STM32
      RS08
    Texas Instruments:
    LM3S,LM4,TM4C12x,SimpleLink
      HC16
    Toshiba:
    TX00,TX03,﹠TX04
      CPU3xx    
      Power MPC5xx/8xx
    STMicro: SPC5
  • High-speed USB interface from PC to Multilink allows for fast, easy programming and debugging -- with the ease and compatibility of the USB interface.
  • Draws power from USB interface-- no separate power supply required (draws less than 1mA from the target).
  • Can be used to power target MCU.
  • Target Voltage:1.8V-5.25V
  • Target Frequency: 16Khz-50Mhz (applies to HCS08, RS08, CFV1, S12Z, or HCS12X only)
  • Supports JTAG daisy chaining of multiple ARM MCUs.
  • Pipelined programming algorithms for some Power Architecture families that dramatically increase programming speed.
  • I/O line clamping for added protection
  • Auto-frequency detection + trimming capabilities for HCS08 devices.
  • Auto-frequency detection for HC(S)12(X) devices.
  • Generates programming voltage on RESET line for RS08 devices.
  • ARM device support includes both the JTAG and SWD protocols

PROG32Z
CPU3xx Flash/EEPROM Programmer

PROG32Z Programmer allows program/reprogram external flash devices in-circuit, via P&E's a 10-pin BDM connector on the target system.

  • Program
  • Verify
  • Blank check
  • Upload
  • Display
  • Erase

ICD32Z
CPU3xx Incircuit Debugger

Based on Window98 / ME/NT/2000/XP for debugging code to give the user access to all on-chip resources。

  • Full-speed in-circuit emulation
  • Breakpoints with counters on the Nth execution
  • Variables window showing many data types
  • Realtime execution as well as multiple tracing model
  • Startup and Macro files for automating the debug process
  • Context-sensitive help for all commands
  • Timing measurement and execution count functions
  • Support for symbolic register files
  • Full assembly source-level debugging
  • C source-level debugging based on IEEE695 format A 64K starter version of the ICDCFZ realtime debugger is included in the 64K Starter Edition of the PKGCFZPRO_USB and is available for download at no charge!

PKG32Z
PKG32Z 683xx Development Package

  • ICD32ZIn-Circuit Debugge
  • PROG32ZFlash/EEPROM Programmer
  • WinIDE32ZWindows Integrated Development Environment
  • REG32Register File Viewer/Editor

CAB_RIBBON_10-PIN


10-Pin Ribbon Cable for 68HC16/683xx/PowerPC

 

 

USB-ML-16/32 (Discontinued)
USB-ML-16/32 Interface

  • The USB CPU16/32 Multilink has been discontinued. The replacement part for this unit is the high speed all-in-one Multilink Universal FX interface. Older software will need an upgrade to use the FX.

CABLE_16/32 (Discontinued)
CPU16/3xx BDM Interface (5V, Parallel Port)

  • The CABLE_16/32 has been discontinued. The replacement part for this unit is the high speed all-in-one Multilink Universal FX interface. Older software will need an upgrade to use the FX.

CABLE_16/32LV (Discontinued)
CPU16/3xx Low-Voltage BDM Interface (3.3V, Parallel Port)

  • The CABLE_16/32LV has been discontinued. The replacement part for this unit is the high speed all-in-one Multilink Universal FX interface. Older software will need an upgrade to use the FX.

CASM32Z
CPU3xx Command-Line Assembler

  • Macro support
  • S19 objects
  • Conditional assembly
  • Include files
  • Full listing control with cycle counter

Unit Library SDK for CPU3XX
CPU3XX Hardware Interface Library Routines (SDK)

The package includes both C/C++ and PASCAL example routinesThe package consists of an interface DLL/SO and sample code。The C and Delphi modules in the software package come as sample source code come as source code;The library is very useful for building your own production line testers.The demo programs show you how to initialize the interface, program registers, download code and step through code.Starting with these programs it is easy to customize them to your specific requirements.

Key Features:

  • Works with all Power CPU3xx microcontrollers
  • Works through P&E's Cable 16/32 ,USB-ML-16/32 and USB Multilink Universal FX Hardware Interfaces
  • Provides Interface to Background Debug Mode
  • Included in the package are C/C++ and PASCAL modules
  • Source and executables provided for both C and PASCAL demos
  • Number of functions in the library - 23
  • Compilers supported:
    • UNIT32Z and UNIT32Z_DIST: MicrosoftVisual C++ 5.0 or greater, Delphi 2.0 or greater,Windows 32 and 64-bit
    • UNIT32Z-LINUX and UNIT32Z-LINUX-DIST: GNU Compiler Collection and Sun Compiler Collection For x84 Kernels: 2.2.x-2.6.x
  • UNIT32Z library is very useful for building custom test, calibration, and update applications

WINIDE32Z
CPU3xx Windows Integrated Development Environment

WINIDE32Z allows you to run external programs - including assemblers, C-compilers, debuggers, and flash programmers - in one environment, with a single hotkey for each. WINIDE32Z comes installed with P&E's CASM32 assembler.

Editor features include:

  • Fully Reconfigurable
  • Allows execution of external programs
  • On-screen help

Assembler features include:

  • Macro support
  • S19, HEX, IEEE695 objects
  • Conditional assembly
  • Include files
  • Full listing control with cycle counter